Tesla mini coil with AUX input
Magic Tesla coil，Produce high temperature and high pressure plasma，Can sing、Can ignite、wireless power transmission、Turn on the fluorescent lamp，And the wonderful arc，Many ways to play, very interesting small production of scientific experiment
explanation
Tesla coilIt is a transformer that works on the resonance principle (resonance transformer), by scientist Nicolas Where is Tesla1891Invented in, mainly to produce ultra-high voltage but low current High frequency AC power The Tesla coil consists of two groups (Sometimes three groups are used).
The resonance circuit is made up of two coupled circuits Tesla coil difficult to define, Nikolay Tesla experiments with a large number of coil configurations Tesla uses these coils for innovative experiments, such as electrical lighting, fluorescence spectrum , high frequency AC current phenomenon, electric and radio power transmission, starting、Receiving radio signals
Tesla features
1.Tesla generates arc function:
After power on the tail wire will produce arc,magnificent ornate fascinating the arc can ignite!
2.Tesla lighting function:
After the Tesla coil is powered on it can light up the fluorescent lamp in the air!
3.Tesla includes music playback:
A new concept speaker of air vibration sound produced by arc excited air changing into plasma!
You can play mobile phones/Computers music howeverThe sound is relatively low Suitable at night, look at the magic arc listen to music at ease
Tesla function parameters
Board size: 40 x 76 millimeters
Power: 15w
Power input: direct15-24v, electrical current 2A,DC5.5 Interface/Pin
Audio input: 3.5 Jack, you can pick up your mobile phone、mp3、Computer audio
heat dissipation is relatively large when working so the heat sink is hotter!
New development of this product The primary coil is in operation PCB In which There is no need to wind the wire outside,convenient for fans to install, efficient, beautiful, it is a new design There is no such design on the market yet, This Tesla Coil is safe It cannot reach people, Can be used for student experimental use, graduation project assignment, etc.
Note
DO NOT TOUCH COPPER COIL LEAD WHILE OPERATING.
When using, be careful not to touch the heat sink with your hands
It gets hot while the device is operating.
For additional fun, remotely light up the included neon lamp by holding it near the arc of the coil.
PARTS LIST
1 x circuit board
2 x 10 k.ohm 1%
2 x 2 k.ohm 1%
1 x capacitor Multilayer 105
1 x Capacitor 1uf/50v
1 x Transistor TIP41
1 x Transistor Irf530
2 x heatsink
1 x 2.1mm dc power jack
1 x aux jack
2 x LED RED
1 x copper pillar
1 x hook-up wire
2 x screw for heatsink
6 x hex head bolts
4 x nuts
1 x neon lamp
دیدگاهها
هیچ دیدگاهی برای این محصول نوشته نشده است.