ماژول وای فای ESP-12F با هسته Ai-Thinker – ESP8266

ESP-12F module with ESP8266 Wi-Fi core
Description
ESP-12F is a WiFi module based on the ESP8266 32-bit MCU microcontroller, this module is low-power and supports the standard IEEE802.11 b/g/n protocol and a full TCP/IP protocol stack.
This module has I/O, SPI, UART ports and 4MB internal flash memory, so an external microcontroller is not required to work, you will only have to use a CP2102 USB to TTL Converter to be able to program it .
What is the ESP-12F for?
The ESP-12F is used to connect MCU microcontrollers or development boards to the Internet to monitor sensors or remotely control actuators.
It is ideal for Internet of Things projects and if you are making your own PCB printed circuit board for an IOT application you can integrate it quickly, you will only have to solder it to your own PCB.
Application
IOT
Mobile Devices
Networking Application
Internet/Intranet Communication
Internet of Things applications
Wireless control systems
automation
Also monitoring projects
SPECIFICATIONS
Model: ESP-12F
Package: SMD22
Dimensions: 24mm x 16mm x 3mm (±0.2)mm
SPI Flash: 32Mbit
Communication interface: UART, GPIO, ADC and PWM
Security: WEP/WPA-PSK/WPA2-PSK
Operating modes: AP, STA and STA
IO ports: 9
ADC ports: 1
I/O voltage tolerance: 3.6V Max
Incorporates test LED on GPIO2 pin
Configurable Baud Rate: Supports 300 to 4608000 bps, default 115200 bps
Antenna: Included on PCB
Frequency range: 2412 ~ 2484 MHz
Transmission power: 802.11 b/g/n
b: 16±2 dBm (@11Mbps)
g: 14±2 dBm (@54Mbps)
n: 13±2 dBm (@HT20, MCS7)
Operating voltage: from 3.0V to 3.6V
Typical operating voltage: 3.3V
Current:
Continuous transmission: Average ~2mA and Peak: 500ma
Modem sleep: ~20mA
Light sleep:~2mA
Deep sleep:~0.02mA
Operating temperature -40ºC and 85ºC

Datasheet
esp-12F
ESP8266