NEW version – Nano V3 constructed on the ATmega168 minicontroller (16MHz) has the small size and can be used together with model boards for solderless wiring (breadboard).
It has similar structure with Arduino Diecimila/Duemilanove, but different size.
To reduce the size, components are mounted on both sides of the PCB.
The board uses a chip CH340G as converter UART-USB. Chip CH340G – is a budget solution.
With an operation frequency in 12Mhz, yields stable result of a data interchange (for correct installation of drivers on the computer follow the instruction).
Nano V3, can be powered via miniUSB-port (up to 500mA).
External power supply 6-12V unregulated to output VIN, or 5V external power source to a regulate output of 5V.
The power supply is automatically selected with the maximum voltage value.
** This Nano ATmega168 have Pin Out for V3, not V2.
Specification
Microcontroller : ATmega168
Using IC CH340
Output voltage 5V/800mA, 3.3V/180mA (Only in NEW version)
Input Voltage (recommended): 6-12 V
Digital I/O Pins: 14 (of which 6 provide PWM output)
Analog Input Pins: 8
Flash Memory: 16 KB (ATmega168) which 2 KB used by bootloader
SRAM: 1 KB (ATmega168)
EEPROM: 512 bytes (ATmega168)
Clock Speed: 16 MHz
Dimensions: 44 x 19 mm
Nano Board with CH340 chip without USB Cable compatible with Arduino
Note: CH340 chip might not work directly with some PC/Laptop, you will need some ch340 drivers.
دیدگاهها
هیچ دیدگاهی برای این محصول نوشته نشده است.