ماژول مبدل ولتاژ اتوماتیک DSN6000AUD

The DSN6000AUD module is an automatic Buck-Boost converter module that will convert the input voltage to your desired set voltage.
This module detects the input voltage is lower or higher than the output and will always deliver a constant voltage to you after increasing or decreasing.
For example, your output is set to 12 volts, now if your input is 5 volts or 15 volts, your output will be the same 12 volts.
The input voltage of this product is 3.8 to 45 volts and the output voltage can be adjusted between 1.25 to 32 volts.
The amount of output current is 3 amps peak.
The working frequency of this switching converter is around 400KHz and it has a low ripple of around 50 millivolts in the output.
Specifications
Model Specification: DSN6000AUD Automatic Buck module
Module Properties: Non- isolated boost (BOOST)
Rectification: Non- Synchronous Rectification
Input Range: 3.8V – 45V
Output Range: 1.25V – 32V
Input Current: 3A ( max ) , no-load 18mA (5V input , 8V output , no-load is less than 18mA. Higher the voltage, the greater the load current. )
Conversion efficiency: <94% ( the greater the pressure , the lower the efficiency )
Switching frequency: 400KHz
Output Ripple: 50mV ( the higher the voltage, the greater the current, the greater the ripple )
Load Regulation: ± 0.5%
Voltage Regulation: ± 0.5%
Operating Temperature: -40°C to +85°C
Dimensions: 48 x 25 x 14mm ( L x W x H )
Precautions
1. It is recommended to use the current within 2.7A when working for a long time. In order to ensure the stability of the output, please keep the minimum voltage difference of 1.5V. 2. The wiring is connected as shown in the connection diagram shown in the highlights. Please do not connect it in reverse. The wrong connection method may cause the power module to burn out.