ماژول جی پی اس GY-GPSV3-NEO 7M Module

GY GPSV3 NEO-7M Ublox GPS module
Features

Model: HW-448 V0.0.2 / GY-GPSV3-NEO
Using imported NEO-7M-0-000 GPS module
Module with ceramic destined antenna, signal super
EEPROM power down to save the configuration parameter data
With data backup battery
There are LED lights
High quality Immersion Gold PCB
Antenna Size: 25*25mm/0.98*0.98″
Module Size: 25*35mm/0.98*1.37″
Installation Diameter: 3mm
Supply Voltage: 3V-5V
The default baud rate: 9600
NEO-7M GPS Module Pinout
GND is the ground pin and needs to be connected to the GND pin on the Arduino.
TxD (Transmitter) pin is used for serial communication.
RxD (Receiver) pin is used for serial communication.
VCC supplies power to the module. You can connect it directly to the 5V pin on the Arduino.

Datasheet:

NEO-7 (1)

NEO-7 (2)

Note: When buying, consider the possibility of non-registration and disruption to operators.