ماژول افزاینده 150 وات DC-DC

DC-DC 10-32V to 12-35V 150W 6A Adjustable Mobile Power Supply Module for Laptop
Setting
Type of module: non-isolated boost module
Module size: length 65MM * height 23MM * (width 56.5MM, heat sink)
Input mode: IN + positive input, IN- negative input
Output mode: OUT + positive output, OUT-negative output
Wiring method: no soldering, terminal
Input voltage: 10-32V
Output voltage: continuously adjustable (12-35V), our default supply voltage is 19V.
Output current: 6A (MAX)
Input current: 10A (MAX) (more than 10A, please strengthen the heat,)
Output power: natural cooling 100W (MAX), plus fan 150W (MAX)
Easily drive 65W 90W laptops including dual core
Using 12V battery with normal 19V 3.42A portable module, the temperature is about 45 degree
Conversion efficiency: 94% (measured when inputting a 16V, 19V, 2.5A output) (for reference only)
Working temperature: industrial grade (-40 ° C to + 85 ° C) (ambient temperature exceeds 40 degree, please reduce power consumption, or add fan)
Full load temperature increase: 45 ° C
No-load current: typical 25mA
Short circuit protection: None (please install overcurrent protector at the input)
Input reverse connection protection: none, input serial diode
Application domain
1) DIY an adjustable output car power supply, you just need to connect your 12V power supply to the input, you can (14-35V) continuously adjust for free, but the output voltage can not be lower than the voltage d ‘Entrance.
2) Universal car laptop power supply. The input is connected to your 12V power supply and the output is regulated according to the voltage of your laptop to operate.
3) Boost charger, you can use 12V power supply to charge batteries above 12V, such as 24V batteries.
4) Power up your electronic equipment. Just adjust the voltage to the voltage you need, and the current does not exceed the rated current.
5) The system is the pre-stage power supply.
When you make a 10-18V project input, your system board needs about 24V power and its power supply is very large, but the power of an ordinary DC-DC module is too low.
then you choose our module will be your best choice, you can work without debugging directly on the machine, easy to achieve high efficiency and strong increase in power.