ماژول کارت خوان RFID با رابط USB فرکانس 13.56MHZ

14 نفر در حال مشاهده این محصول هستند!
توضیحات

USB RFID Reader 13.56 MHz ISO 14443A Attendance Control
It is an RFID card reader with USB and a working frequency of 13.56 MHz, it is compact in size, it only allows card readings based on international standard protocols ISO14443A, ISO14443B and ISO1569 and that are of the same frequency.
This reader does not include RFID cards or Tags but you can purchase them from the following links
RFID Card 13.56 MHz
RFID Tag 13.56 MHz
Use
1. Connect with computer via USB cable.
2. Open notepad or a document.
3. Put the card on top of the reader.
4. The document will issue the card number to 8 digits automatically
SPECIFICATIONS AND FEATURES
Type: RFID Reader
Model: R20C-USB-2H+4H
USB Power Supply: +5V DC
Current consumption: 70mA
USB Cable Length: 1m
Dimensions: 104 × 69 × 12mm
Weight: 45g
Working frequency: 13.56 MHz.
Supported operating systems: Windows 10, 7, XP, 98, 2000 CE, I, NT, Linux Vista
Card reader type: IC (14443A, 14443B, 15693 three options) physical card number
Communication speed: 106 Kbit/s
Serial port baud rate: 9600 Kbit/s
Effective card reading distance: 100mm (varies depending on card)
Card reading time: <100ms
Status Indication: 2-color LED indication: red when power on, green when card is read.
Data format: The four-byte serial number of the card is converted to eight-digit decimal format and the carriage return is terminated.
Operating temperature: -10 ℃ ~ + 70 ℃
Storage temperature: -20 ℃ ~ + 80 ℃
Maximum working relative humidity: 0 ~ 95%
Communication interface: USB interface / RS232 serial port
Note
This reader can only read the first 8 digits of the card and does not have the functions of writing and copying cards.
Installation Notes
Connect one end of the cable to the corresponding interface of the computer and one end to the communication port of the card reader.
Once connected to the PC, it will begin to recognize the device and begin to configure it, a small window will appear that will say “Device configuration.”

We wait a moment until the driver is installed correctly since the driver has just been installed, a message will appear stating that the device is ready to use.

The card reader will beep and the LED will turn red.
To verify its operation you can open a document, be it a blog of notes or an Excel document.
Then slide the card into the reader and it will beep and change the color of the LED to green for a moment and return to red.
Precautions
The card reader is installed in a location convenient for card swiping operations, while avoiding being close to the screen, as radiation from the screen may interfere with the normal operation of the card reader.
Avoid approaching large area metal objects (especially the left side of the metal structure), otherwise the card reading distance will be short or even the card will not be read.
The length of the communication cable between the card reader and the computer should be less than 15 meters.
No response when swiping the card
whether the interface is inserted correctly, whether the RF card is a compatible RFID card, whether the RF card is broken, whether another RF card is in the reading range of the card.
Transmission data error
If the card is read in an environment of strong electromagnetic field interference, if the communication cable between the card reader and the computer is too long.