ماژول تغذیه برد بورد

BREAD POWER

This module is a simple way of supplying power for your own experiments or experimental set-ups on breadboards.

It is easy to attach the board, which then supplies the breadboard with 3.3 and 5 V, whereby the voltage can be individually adjusted for each side.

In addition, there are also 3.3 V and 5 V and ground on pins ready to be used.

The maximum output current is 700 mA.

Micro USB ports on most mobile phone chargers can be used to supply the board with power.

A standard USB and a DC IN input is also available.

If DC IN is used as an input source, the USB ports can also be used to discharge current.

You can use the switch to select the input source, either USB or DC.

Technical data
• Maximum current: 700 mA
• Input 1: DC power plug 5.5 / 2.1 mm, DC IN 6 – 12V
• Input 2: USB 5V
• Input 3: Micro USB 5V
• Output: 3.3V; 5V; ground; USB