24-bit A/D Converter Module with TM7711
The TM7711 is a 24-bit A/D converter designed exclusively and widely used in high precision weighing systems.
It allows an accurate conversion of the data read by the resistive weight sensors, the Wheatstone bridge configuration reading, amplifying and converting the differential voltage is the most recommended for the purpose.
It only requires a single voltage between 2.6 and 5.5V and has a pure differential input with reference.
Thanks to the two-conductor serial protocol it integrates perfectly with Arduino and MCU.
SPECIFICATIONS
Supply voltage: 2.6 ⁓ 5.6 VDC
1 ADC channel with fully differential input
A/D resolution: 24-bit
Low noise amplifier with 128 gain
Built-in clock oscillator does not require any external devices
Serial communication: 2-wire I2C
CONNECTION MODE
1. AVDD 8. DVDD
2. A+ 9. DOUT
3. A- 10. SGK
4. AGND 11. DGND
Connection Strip pitch: 2.54 mm
TM7711 24-bit Pressure Module Pinout
This sensor has 8 pins
VIN: Module power supply – 3.3-5 V
GND: Ground
SCK: Module and microcontroller synchronization
OUT: Digital output
AVDD: Load cell power supply
AGND: Load cell ground
A+: The first output of load cell
A-: The second output of load cell
دیدگاهها
هیچ دیدگاهی برای این محصول نوشته نشده است.