- پروگرامرها
- دما و رطوبت
- سایر ماژول ها
- سنسور بخار سرد
- کی پد و جوی استیک
- ماژول GPS-GPRS
- ماژول رله و سوییچ
- ماژول شبکه
- ماژول نمایشگر
- ماژول های RF
- ماژول های RFID
- ماژول های پخش صدا
- ماژول های پردازش تصویر
- ماژول های تاریخ و ساعت
- ماژول های تغذیه – ولتاژ – جریان
- ماژول های ذخیره داده
- ماژول های شتاب سنج و ژیروسکوپ
- ماژول های مبدل
- ماژول های محافظ شارژ باتری
- ماژول های مولد پالس
- ماژول ولتمتر و آمپرمتر
توضیحات
Models K620E-C AA/AAA Charger
Features
•Charges AA and AAA Ni-MH rechargeable batteries.
•Charge up to 4 AA or up to 4 AAA batteries.
Operating Instructions CHARGE INDICATOR LIGHTS One or both lights are on (steady) during charging, depending on whether you are charging 2 or 4 batteries.
HOW TO CHARGE
1. Place 2 or 4 AA or AAA size batteries into the charger so that the + (positive) and – (negative) ends (terminals) of the batteries correspond to the same + and – marking in the charger.
When charging only 2 AA or AAA size batteries, place them together in either the left or right side (channel) of the charger.
CAUTION: Do not mix AA and AAA size batteries in the same channel.
2. Plug the charger into an electrical receptacle (outlet).
The charge indicator lights are illuminated and battery charging begins. (NOTE: Do not insert or remove batteries during this charging process.) The charging cycle time depends on battery type.
TIPS
•For best performance, use only Kodak Ni-MH batteries.
•Charge the batteries before using (unless using pre-charged batteries).
•Do not use charged and discharged batteries together.
Insert batteries correctly by matching + (positive) and –(negative) ends (terminals) of the battery to the same + and – position in the charger.

نظرات (0)
اولین کسی باشید که دیدگاهی می نویسد “شارژر باتری کداک k620”
برای فرستادن دیدگاه، باید وارد شده باشید.
محصولات مرتبط
باتری لیتیوم یون 18650 شارژی 3.7 ولت 2200 میلی آمپر سانی بت 4c
جاباتری سکه ای ایستاده CR2032 CR2025
12,000 تومان
جاباتری سکه ای CR2032 CR2025 CR2016
12,000 تومان





نقد و بررسیها
هنوز بررسیای ثبت نشده است.